Agriculture
Hassan Mosaferyzyaaldiny; Amin Alizadeh; Parviz Rezvani Moghaddam
Abstract
An experiment was conducted in a strip-plot layout based on a randomized complete block design with three replications in the 2016-2017 growing season at the Bakhrez county, Khorasan Razavi province, Iran in order to study quantitative performance and water use efficiency of a few saffron criteria in ...
Read More
An experiment was conducted in a strip-plot layout based on a randomized complete block design with three replications in the 2016-2017 growing season at the Bakhrez county, Khorasan Razavi province, Iran in order to study quantitative performance and water use efficiency of a few saffron criteria in response to different irrigation volumes and intervals. Irrigation intervals was allocated as horizontal factor (factor A) in four levels (a1=15, a2 =30, a3 = 45, and a4 = 90 days) and irrigation water volume performed as vertical factor (factor B) in four volumes (b1 = 250, b2 = 500, b3 = 1000 and b4 = 1250 m3.ha-1). The results showed that the highest saffron flower and corm yields were obtained in the a2b3 treatment (total water volume of 6000 m3.ha-1). The highest reduction in corm yield is shown in the a4b1 treatment (total water volume 750 m3.ha-1) with a decrease of 72.1% compared to a1b2 (total water volume 5500 m3.ha-1). The lowest fresh flower yield was obtained in the a4b1 treatment (total water volume 750 m3.ha-1) with a decrease of 76.5% compared to a1b2 (total water volume 5500 m3.ha-1), and the lowest yield of corm yield was shown in treatment with a4b1 volume (total water volume 750 m3.ha-1) with a decrease of 70.6% compared to the a2b3 volume (The total volume of water was 6000 m3.ha-1). Also, the results showed that the highest decrease in corm water use efficiency was obtained in the a1b4 treatment (total water volume 13750 m3.ha-1) decreased by 85.4 percent compared to a3b1 (total volume of water 1000 m3.ha-1) and the greatest decrease in fresh flower water use efficiency was shown in the a1b4 treatment (total volume of water 13750 m3.ha-1) decreased by 82.4% compared to a2b1 (total volume of water 1500 m3.ha-1). According to the results, the use of 250 to 500 m3.ha-1 irrigation in 30-day intervals (1500 to 3000 m3.ha-1) is recommended for maximum water use efficiency in saffron cultivation.
Fatemeh Parsapour; Parviz Rezvani Moghaddam; Surur Khorramdel
Abstract
Response surface methodology (RSM) is defined as a set of mathematical and statistical techniques that are used to optimize yield of a product. In order to study the effects of urban waste compost and corm rates on flower yield of saffron using RSM, an experiment was conducted at the Research Field of ...
Read More
Response surface methodology (RSM) is defined as a set of mathematical and statistical techniques that are used to optimize yield of a product. In order to study the effects of urban waste compost and corm rates on flower yield of saffron using RSM, an experiment was conducted at the Research Field of the Ferdowsi University of Mashhad, Iran during the growing season of 2017-2018. The treatments were determined based on low and high levels of urban waste compost (0 and 20 t.ha-1, respectively) and corm weight (5 and 15 t.ha-1, respectively). These were computed by using Minitab V. 17. Dry weight of stigma, dry weight of style, fresh weight of flower, flower number, corm number, dry weight of corm, and number of buds per corm were calculated as dependent variables and changes of these variables were evaluated by using a regression model. Lack-of-fit test was used to evaluate the quality of the fitted model. The adequacy of the model was tested by analysis of variance. In general, the full quadratic polynomial equation was tested to determine significance of the model and the components (such as linear, squared and first-order interaction terms). The quality of the fitted model was judged using the determination coefficient (R2). The results show that the effect of linear component on all traits studied except fresh weight of flower, dry weight of corm 0-4g, and number of buds per corm 0-4 and 8-4 grams were significant. The effect of total grade two had a significant effect on the traits of flower number, fresh weight of flower, dry weight of stigma, dry weight of style, number of daughter corms per 0-4, 4-8 and >8 grams, dry weight of corm per 4-8 and >8 grams and number of buds per >8 grams was significant. Also, the interaction effect of two factors of urban waste compost and weight corm on the number of flowers, fresh weight of flower, dry weight of stigma, dry weight of style, number of daughter corms per 4-8 and >8 grams, dry weight of corm 4-8 and >8 grams, and number of buds per corm >8 grams were significant. Lack of fit test had no significant effect on the studied traits. The full square model for the response variables gave insignificant lack-of-fit indicating that the data of experiment were satisfactorily explained. The highest flower number, fresh weight of flower, stigma dry weight and style dry weight were observed for 5 t.ha-1 corm+ 20 t.ha-1 compost. Optimum of corm weight and urban waste compost and desirability for the traits related to flower and corm with 5 t.ha-1, 20 t.ha-1and d = 0.92 were urban waste compost with 12 t.ha-1, 20 t.ha-1and d = 0.95, respectively. Based on the results, municipal waste compost and corm weight had a positive effect on most of the studied traits.
Hassan Feizi; Ali Hosseini; Hossein Sahabi; Ramin Nazarian
Abstract
For evaluation of response of flower and corm yield of saffron to nanobiologic fertilizer application methods in comparison to cow manure and chemical fertilizer an experiment was conducted in Shadmehr region as randomized complete block design with 10 treatments with four replication during two years ...
Read More
For evaluation of response of flower and corm yield of saffron to nanobiologic fertilizer application methods in comparison to cow manure and chemical fertilizer an experiment was conducted in Shadmehr region as randomized complete block design with 10 treatments with four replication during two years (2014-2015 and 1015-2016). The treatments were 1. Corm inoculation with nanobiofertilizer (Bioumik product of Biozar company), 2. Corm inoculation+use in irrigation water, 3. Corm inoculation+ foliar application 4. Corm inoculation+ foliar application+use in irrigation water, 5. In irrigation water, 6. Foliar application 7. Use of chemical fertilizer (Urea, Ammonium phosphate and Potassium sulphate) 8. Use of cow manure 9. Use of chemical fertilizer +Use of cow manure and 10. Control. Studied traits were corm dry yield, flower dry yield, stigma dry and fresh yield and flower number. Based on result from third year the highest stigma dry yield (about 14 kg/ha) and flower number were achieved in Corm inoculation+ foliar application+use in irrigation water treatment (by 176 % increase in comparison to control) and the highest corm yield was seen in corm inoculation treatment (by 41 more than control). Results showed that the best method for corm improvement was corm inoculation with nanobiofertilizer and for flower improvement it is recommend to use of Corm inoculation+ foliar application+use in irrigation water.
Agriculture
Reza Asghari; Mohammadreza Dadashi; alireza razavi; Hassan Feizi; saed bakhtiari
Abstract
In order to study the effects of salinity stress of irrigation water and different amounts of cow manure on morphological and physiological characteristics of saffron (Crocus sativus L.), an experiment was conducted during 2015-16 in the Jalagh Rokh Torbat Heidarieh area. The treatments were consisted ...
Read More
In order to study the effects of salinity stress of irrigation water and different amounts of cow manure on morphological and physiological characteristics of saffron (Crocus sativus L.), an experiment was conducted during 2015-16 in the Jalagh Rokh Torbat Heidarieh area. The treatments were consisted of four levels of irrigation water salinity as the main factor (1, 4, 7 and 10 dS.m-1) and cow manure (sub factor) in four levels including control (without fertilizer), 20, 40 and 60 (t.ha-1) that were split plot in a randomized complete block design with three replications. The studied traits included fresh weight and numbers of flowers, fresh and dry weights of stigma, leaf chlorophyll content, proline content, diameter, fresh and dry weights of corm. The results of analysis of variance showed that the effects of different amounts of cow manure and salinity stress levels on all traits were significant at 1% level. In this experiment, the highest fresh weight and numbers of flowers, fresh and dry weight of the stigma were obtained in the control salinity treatment (without salinity) and 60 (t.ha-1) of cow manure. With increasing salinity levels up to 7 dS.m-1, chlorophyll a, b and total chlorophyll increased and then decreased sharply. The results showed a significant increase in proline with increasing salinity levels. In addition, diameter and fresh and dry weights of the corms decreased with increasing salinity levels, so that their maximum and minimum values were obtained in salinity control (without salinity) and 10 dS.m-1 respectively. The results showed that the use of cow manure reduces the effects of salinity stress on corm yield and yield of saffron flower.
Agriculture
Alireza Koocheki; Ghorban Ali Asadi; Milad Bagheri Shirvan; Bahareh Bicharanlou
Abstract
Due to climate change it seems that the suitable area for production of saffron is shifting towards the Northern area of Khorasan. On the other hand, corm density and nutrient management are important factors in saffron production. To find out the credibility of this assumption, an experiment was conducted ...
Read More
Due to climate change it seems that the suitable area for production of saffron is shifting towards the Northern area of Khorasan. On the other hand, corm density and nutrient management are important factors in saffron production. To find out the credibility of this assumption, an experiment was conducted based on a randomized complete blocks design arranged in split plot with three replications in a field located 10 km of Shirvan during the 2013-14, 2014-15 and 2015-16 growing seasons. Corm density (50, 100 and 150 corm.m-2) and different amounts of chemical and organic manure [No fertilizer (Control), amount of urea, triple super phosphate and potassium sulfate 100, 100, 50 (C1), 200, 200, 100 (C2) and 300, 300, 150 (C3), cow manure consumption based on 100 kg.ha-1 urea (3066 kg.ha-1), based on 200 kg.ha-1 urea (6132 kg.ha-1) and based on 300 kg.ha-1 urea (9198 kg.ha-1)] were allocated to the main and sub-plots, respectively. Three year average of harvest showed that flower and corm traits improved with increasing corm density and cow manure consumption, while the highest density compared to minimum density caused increasing flower number, fresh flower yield, dried stigma yield, daughter corm number and corm yield by 35, 61, 29, 180 and 122 percent, respectively. Also the highest amount of cow manure compared to control increased flower number, fresh flower yield, dried stigma yield and corm yield by 32, 51, 38 and 51 percentages, respectively. Therefore, more flower and corm yield were obtained in 9198 kg.ha-1 cow manure consumption with 150 corm.m-2 planting density. Therefore, it seems that the production of saffron is suitable using with organic manure compared with chemical manure. Moreover, saffron planting with high corm density is a solution for improving the yield of saffron in the early years of planting.
Agriculture
Hasan Rivandi; Hamid Marvi; Matin Jami Moeini
Abstract
In order to investigate the effect of effective microorganism application method on saffron growth characteristics in the presence of chemical and organic fertilizers, a field experiment was conducted at Sheshtamad County during the growing season of 2013-2014. The experiment was carried out as split ...
Read More
In order to investigate the effect of effective microorganism application method on saffron growth characteristics in the presence of chemical and organic fertilizers, a field experiment was conducted at Sheshtamad County during the growing season of 2013-2014. The experiment was carried out as split plot based on a randomized complete block design with three replications. The experimental factors included effective microorganisms (EM) application method as main plots (no application, soil application and foliar application of EM) and chemical and organic fertilizers application as subplots (no application, soil application of humic acid, soil application of 20, 20, 20+TE and soil application of humic acid + 20, 20, 20+TE). The results showed that soil and foliar application of EM had no significant effect on plant height, but it significantly increased corm number, corm yield, shoot dry weight and number of buds per corm. The average corm weight was reduced in response to soil and foliar application of EM. The highest corm number (220.33), corm yield (1023.33 g m-2) and shoot dry weight (43.02 g m-2) were obtained in soil application of EM treatment. The maximum number of buds per corm (8.68) and average corm weight (5.10 g) were observed in foliar application and no application of EM conditions, respectively. Application of 20, 20, 20+TE and combined application of humic acid and 20, 20, 20+TE increased corm number, corm yield, shoot dry weight and number of bud per corm compared to control and soil application of humic acid. Soil application of humic acid produced the highest average corm weight. Soil and foliar application of EM improved the response of saffron growth characteristics to organic and chemical fertilizers. According to the results, soil applications of EM and 20, 20, 20+TE are recommended to produce maximum corm yield in saffron.
