Saffron Agronomy and Technology

In collaboration Iranian Medicinal Plants Society

Current Issue

By Issue

By Author

By Subject

Author Index

Keyword Index

About Journal

Aims and Scope

Editorial Board

Publication Ethics

Indexing and Abstracting

Related Links

FAQ

Peer Review Process

Journal Metrics

News

Journal Forms

Guide for Authors

Quality control and surveying the capability indices of the saffron production process

Document Type : Research Paper

Author

1 Assistant Professor., Department of Industrial Engineering, University of Torbat Heydrieh, Iran

2 Saffron Institute, University of Torbat Heydarieh, Torbat Heydarieh, Iran.

Abstract

As the world's most expensive agricultural and medicinal product, saffron holds a special place among Iran's industrial and export goods. Customers constantly seek the best products in terms of price, quality, and timely delivery. Thus, it is crucial and necessary to ensure quality control in the saffron production process in order to satisfy customers and enhance profitability. To thrive in the competitive market, greater attention should be given to the critical quality characteristics of saffron, namely crocin, picrocrocin, and safranal. Moreover, statistical process control, a method for monitoring processes to identify the underlying causes of specific changes and deviations, is essential. Control charts and process capability indicators serve as necessary tools in statistical process control. Therefore, this paper primarily focuses on the use of the exponentially weighted moving average control chart, which is effective for handling minor deviations, to monitor and control the saffron production process in a data set during the initial phase. The data sets pertain to the qualitative characteristics of saffron in the cities of Torbat Heydarieh, Zaveh, Roshtkhar, Bardeskan, and Kashmar. Following the examination of the quality aspects of the saffron production process and its sustainability, emphasis is placed on the control chart as the most crucial statistical process control tool. Efficiency indicators of the saffron production process are then calculated and analyzed using standards 259-1 and 259-2. Through this analysis, efforts can be made to reduce process variability and consequently compare and enhance the quality level of saffron produced in the investigated areas. The results showed that in premium cut string saffron, Torbat Heydarieh city has the best picrocrocin, Kashmar city saffron has the best safranal, and Rashtkhwar city saffron has the best crocin. Also, the best picrocrocin and saffron type 1 string saffron belong to the town of Torbat Heydarieh and the best safranal belongs to the town of Bardeskan. Utilizing these indicators in the saffron production process serves as a measure to evaluate the processes' ability to meet customer demands and comply with relevant industry standards.

Keywords

Main Subjects

References
Aghhavani Shajari, M., Rezvani Moghaddam, P., Ghorbani, R., & Koocheki, A. (2022). Does nutrient and irrigation managements alter the quality and yield of saffron (Crocus sativus L.). Agricultural Water Management, 267(1), 107629. https://doi.org/10.1016/j.agwat.2022.107629.
Aissa, R., Ibourki, M., Bouzid, H.A., & Bijla, L. (2023). Phytochemistry, quality control and medicinal uses of Saffron (Crocus sativus L.): an updated review. Journal of Medicine and Life,16(6), 822–836. https://doi.org/10.25122/jml-2022-0353.
Arowolo, O.T., & Ekum, M.I. (2020). Generalized regression control chart for monitoring crop production. American Journal of Theoretical and Applied Statistics, 9(4), 90-100. https://doi.org/10.11648/j.ajtas.20200904.12.
Bergomi, A., Comite, V., Santagostini, L., Guglielmi, V., & Fermo, P. (2022). Determination of saffron quality through a multi-analytical approach. Foods, 11(20), 3227. https://doi.org/10.3390/foods11203227.
Chaouqi, S., Moratalla-López, N., Lage, M., Lorenzo, C., Alonso, G.L., & Guedira, T. (2018). Effect of drying and storage process on Moroccan saffron quality. Food Bioscience, 22(1), 146-153.  https://doi.org/10.1016/j.fbio.2018.02.003.
Chen, K.S., Pearn, W.L., & Lin, P.C. (2003). Capability measures for process with multiple characteristics. Quality and Reliability Engineering International, 19(2), 101-110. https://doi.org/10.1002/qre.513.
Fallahi, H.R., Shajari, M.A., Sahabi, H., Behdani, M.A., Sayyari-Zohan, M.H., & Vatandoost, S. (2021). Influence of some pre and post-harvest practices on quality of saffron stigmata. Scientia Horticulturae, 278(1), 109846.  https://doi.org/10.1016/j.scienta.2020.109846.
García-Rodríguez, M., Serrano-Diaz, J., Tarantilis, P.A., Lopez-Corcoles, H., Carmona, M., & Alonso, G.L. (2014). Determination of saffron quality by high-performance liquid chromatography. Journal of Agricultural and Food Chemistry, 62(32), 8068-8074. https://doi.org/10.1051/ijmqe/2018003.
Kiani, S., Minaei, S., & Ghasemi-Varnamkhasti, M. (2018). Instrumental approaches and innovative systems for saffron quality assessment. Journal of Food Engineering, 216(1), 1-10.  https://doi.org/10.1016/j.jfoodeng.2017.06.022.
Lowry, C.A., & Montgomery, D.C. (1995). A review of multivariate control charts. IIE Transactions, 27(6), 800-810. https://doi.org/10.1080/07408179508936797.
Maghsoodi, V., Kazemi, A., & Akhondi, E. (2012). Effect of different drying methods on saffron (Crocus sativus L.) quality. Iranian Journal of Chemistry and Chemical Engineering, 31(2). https://doi.org/85-89. 10.30492/IJCCE.2012.5993.
Min, Z., Alan, W.G., Shuguang, H., & Zhen, H. (2014). Modified multivariate process capability index using principal component analysis. Chinese Journal of Mechanical Engineering, 27(2), 249-259. https://doi.org/10.3901/CJME.2014.02.249.
Mohammed, Z.M. (2022). Modelling time-series process of an agricultural crop production process by EWMA quality control chart. International Journal of Mathematics in Operational Research, 23(1), 76-95.  https://doi.org/10.1504/IJMOR.2022.126046.
Moratalla-López, N., Parizad, S., Habibi, M.K., Winter, S., Kalantari, S., Bera, S., Lorenzo C., García-Rodríguez M.V., Dizadji A., Gonzalo L., & Alonso, G.L. (2021). Impact of two different dehydration methods on saffron quality, concerning the prevalence of Saffron latent virus (SaLV) in Iran. Food Chemistry, 337(1), 127786. https://doi.org/10.1016/j.foodchem.2020.127786.
Nazarian, R., & Sahabi, H. (2018). Effect of planting density on flower quality in two types of saffron (Crocus sativus L.). Journal of Saffron Research, 5(2), 139-149. (In Persion with English Summary).  https://doi.org/10.22077/jsr.2017.627.1025.
Ordoudi, S.A., & Tsimidou, M.Z. (2004). Saffron quality: Effect of agricultural practices, processing and storage. Production Practices and Quality Assessment of Food Crops, 11(1), 209-260. https://doi.org/10.1007/1-4020-2533-5.
Scagliarini, M. (2011). Multivariate process capability using principal component analysis in the presence of measurement errors. AStA Advances in Statistical Analysis, 95(2), 113-128. https://doi.org/10.1007/s10182-011-0156-3.
Shahriari, H., & Abdollahzadeh, M. (2009). A new multivariate process capability vector. Quality Engineering, 21(3), 290-299. https://doi.org/10.1080/08982110902873605.
Shahriari, H., Hubele, N.F., & Lawrence, F.P. (1995). A multivariate process capability vector. Proceedings of the 4th Industrial Engineering Research Conference, Institute of Industrial Engineers. pp. 304-309.
Shishebori, D., & Hamadani, A.Z. (2010). Properties of multivariate process capability in the presence of gauge measurement errors and dependency measure of process variables. Journal of Manufacturing Systems, 29(1), 10–18.  https://doi.org/10.1016/j.jmsy.2010.06.005.
Voltarelli, M.A., Silva, R.P.D., Zerbato, C., Paixão, C.S., & Tavares, T.D.O. (2015). Monitoring of mechanical sugarcane harvesting through control charts. Engenharia Agrícola, 35(1), 1079-1092.  https://doi.org/10.1590/1809-4430-Eng.Agric.v35n6p1079-1092/2015. 
Zalacain, A., Ordoudi, S.A., Díaz-Plaza, E.M., Carmona, M., Blázquez, I., Tsimidou, M.Z., & Alonso, G.L. (2005). Near-infrared spectroscopy in saffron quality control: determination of chemical composition and geographical origin. Journal of Agricultural and Food Chemistry, 53(24), 9337-9341.  https://doi.org/10.1021/jf050846s.
Saffron Agronomy and Technology
Volume 11, Issue 4 - Serial Number 41
April 2024
Pages 449-469
Files
Share
How to cite
Statistics